What

decorator is most afraid of? Not the dust hitting the wall, but the sudden "click" sound when the pipe is bent - the just-bent pipe card deflated, and the water flow became thinner in an instant; the old house was even more troublesome when it was renovated, and the wall grooves had to bypass the water and electricity lines that had already been laid. The corners of the pipes were too hard, and they cracked in a few days, so that the wall skin leaked and bulged; the outdoor garden setting was more troublesome, the terrain was high for a while and low for a while, and the pipes had to be connected to three or four elbows when they were laid on the slope. Not only did it cost materials, but there were more joints and there was always a worry about water leakage. Almost everyone who has done decoration or engineering has encountered the pain points of these pipe bending.

In response to these headaches, AD PE coil pipe provides a practical solution - with excellent bending resistance and flexible installation characteristics, it has become a "good helper" for pipeline laying in complex sites.

AD PE coil pipe is made of high-quality high-density polyethylene (HDPE) raw materials. After strict formula adjustment, the molecular chain structure is tight, and the impact strength is far higher than that of ordinary plastic pipes. When the pipe needs to be bent, this material can evenly distribute the stress to the entire bending area, and will not concentrate the pressure at the corners like traditional hard pipes. Even if it is bent to a small radius, it will not crack, deflate or deform, and the structure will remain intact after repeated bending.

's "soft and rigid" characteristics make it feel like a duck to water in complex scenes. For example, when renovating an old house, the narrow aisle wall cannot be grooved significantly, so workers do not need to bother reaming holes, but directly wrap the AD PE coil along the arc of the corner, saving half of the grooving time; when the villa is layered for water supply, the pipeline has to pass through the pillars of the stairwell, and the coil can easily bypass the column, using 3 less elbows than traditional pipes, which not only saves materials, but also reduces the risk of water leakage; when the outdoor garden is laid with a sprinkler irrigation system, the terrain is undulating, and the coil is laid down along the outline of the rockery and flower bed, without adding additional telescopic joints, and the construction efficiency is increased by 40%.

In addition to flexible bending, AD PE coil has a hidden advantage - reduced joints. Traditional pipes have to add an elbow every time they are bent, and the more joints, the higher the risk of water leakage. And AD PE coil can directly bend and bypass obstacles, reducing 2-3 joints per 10 meters of pipeline, which saves labor and materials and reduces the probability of later maintenance. Manager Zhang, who is in charge of a garden project in Hangzhou, said: "In the past, when outdoor pipes were laid, 2 elbows were connected every 10 meters. Now with AD PE coil, there are only a few joints after a few hundred meters. After the rainy season, there is no water leakage."

As a well-known brand in the field of plastic pipes, AD Pipe always focuses on user pain points. This PE coil has been repeatedly tested from raw material selection to production process, just to meet the installation challenges of complex sites - whether it is narrow indoor space, tortuous old house lines, or undulating outdoor terrain, it can solve the problem of pipe bending, make installation more flexible, let the use of more peace of mind.

in fact, a good pipe is never "hard". AD PE coil uses flexibility to solve the rigid problem of installation, with strength to ensure the stability of use, turning "difficult pipe" into "easy pipe", so that the pipe laying of complex sites is finally no longer a "headache".